5
Bluetooth phone call
When paired with the phone, if there
is an incoming call, music playback is
paused automatically. You can pick up
an incoming call by pressing
button once. To reject the call, press
(Power) twice quickly.
When an incoming call is answered, you
can use the built-in speaker microphone
for the call. It is located directly below
the
(Power) button. When talking
to the microphone, make sure you are
close to it to ensure good sound clarity.
To end the call, press the
button once.
When you use two speakers on TWS
mode, please talk to the microphone on
the left channel speaker.
6
AUX connection
Open the connector compartment of
the speaker and connect the speaker
with to your device with a 3,5 mm
audio cable. You can control the volume
by pressing the + / - buttons. Shortly
press
(Power) button to mute/
unmute the speaker.
7
Battery status
You can check the battery charge status
in the Bluetooth menu of your device.
During playback, the Bluetooth speaker
warns you by sound signal when the
battery level drops to low. The power
button LED will also flash red.
16
Note: The battery charge level displayed
in the device Bluetooth menu is for
reference only. It may differ from the
actual battery level.
(Power)
8
1. Open connector compartment of
2. Use a USB cable (included) and
3. Connect the other end of the cable
(Power)
4. The red LED lights up while the
5. It may take up to 4 hours to fully
6. Once it has finished charging, the
9
This device has IPX6 protection, which
means that strong water jets will not
have harmful effects on it.
For this protection to be effective, no
external devices may be connected to
the speaker via cables (such as phone
via audio cable or charger via USB
cable) and connector compartment
must be firmly sealed.
Recharging the battery
the speaker.
connect it to the USB Type-C port on
the speaker.
to a USB charger (not included). Use
a 5V/2A USB power supply to charge.
speaker is charging.
charge the battery.
indicator light will go out.
IPX6 water protection
We. HEAR 1