Télécharger Imprimer la page

sunjoe SPX3500 Manuel D'utilisation page 9

Masquer les pouces Voir aussi pour SPX3500:

Publicité

Les langues disponibles

Les langues disponibles

Fig. 3
4. Slide the trigger gun holder in position (Fig. 4).
Fig. 4
Trigger gun holder
5. To assemble the spray wand protector, first snap the tab
into the slot located at the bottom left side of the unit, and
then secure it in place with one 4.8 x 16 screw (Fig. 5).
Fig. 5
Nozzle
storage board
Fix with 4.8
x 16 screws
6. Fit the stainless steel lance into the trigger gun and rotate
the collar until the two parts are completely locked (Fig. 6).
Fig. 6
7. Connect the high-pressure hose to the trigger gun (Fig. 7).
Fig. 7
9
4.8 x 16 screw
Trigger gun
Stainless
steel lance
High-pressure hose
Slot
Tab
Collar
Trigger gun

Publicité

loading