Mitsubishi Electric MLZ-KP18NA2 Notice D'utilisation page 5

N
AME OF EACH PART
Indoor unit
Air inlet
Air outlet
Air cleaning fi lter
(Anti-Allergy Enzyme fi lter, option)
Display section
Safety strings
Open the display cover
Remote control receiving section
Emergency operation switch
Operation indicator lamp
Horizontal vane
Vertical vane
Intake grille
Air fi lter
(Air purifying
fi lter)
Spec name plate *1
Page 5
Remote controller
Battery replacement indicator
Page 3
Operation
display section
Temperature
buttons
Page 5
Operation
select button
Page 5
ECONO COOL
button Page 7
VANE control
button
Page 6
SLEEP button
Page 7
SMART SET
button
Page 6
CLOCK button
Page 3
Lid
Slide the lid
down to open
the remote
controller. Slide
it down further
to get to the
weekly timer
buttons.
Remote
controller holder
• Install the remote con-
troller holder in a place
where the signal can be
received by the indoor
unit.
Outdoor unit
Outdoor units may be different in appearance.
*1 The manufacturing year and month is indicated on the spec name plate.
Signal transmitting
section
Distance of signal :
About 20 ft. (6 m)
Beep(s) is (are) heard from
the indoor unit when the
signal is received.
90°
Operate the remote control-
ler in the area where signal is
received, and beep is heard.
OFF/ON
(stop/operate) button
FAN speed control
button
Page 6
WIDE VANE control
button
Page 6
TIME, TIMER set buttons
Page 3, 7
Increase time
Decrease time
WEEKLY TIMER
set buttons
Page 8
RESET button
Page 3
Only use the remote controller provided
with the unit.
Do not use other remote controllers.
If two or more indoor units are installed in
proximity to one another, an indoor unit
that is not intended to be operated may
respond to the remote controller.
Air inlet (back and side)
Refrigerant piping
Air outlet
Spec name plate *1
Drain outlet
En-4