Mitsubishi Electric MLZ-KP18NA2 Notice D'utilisation page 47

F
AN SPEED AND AIRFLOW
DIRECTION ADJUSTMENT
Press to select fan speed. Each press changes
fan speed in the following order:
(AUTO) (Quiet) (Low)
• Two short beeps are heard from the indoor unit when set to AUTO.
Press to select airfl ow direction. Each press
changes airfl ow direction in the following order:
(AUTO) (1) (2) (3)
• Two short beeps are heard from the indoor unit when set to AUTO.
Airflow direction
(AUTO) .......... The vane is set to the most effi cient airfl ow direction. COOL/DRY:
horizontal position. HEAT: downward position.
(Manual)......... For efficient air conditioning, select upper position for COOL/DRY,
and lower position for HEAT.
(Swing)........... The vane moves up and down intermittently.
Press to change horizontal airfl ow direction.
• The vertical vane moves for about 30 seconds.
• After 30 seconds, the vertical vane moves to its original position. In
this case, press again.
Press again to set horizontal airfl ow direction.
• The vertical vane stops and the airflow direction is set.
(Med.) (High)
(4) (5) (SWING)
S
MART SET OPERATION
1
Press during COOL, or HEAT mode
select SMART SET mode.
2
Set the temperature, fan speed, and airfl ow direction.
• The same setting is selected from the next time by simply pressing
• Two settings can be saved. (One for COOL, one for HEAT)
• Select the appropriate temperature, fan speed, and airflow direction ac-
cording to your room.
Press again to cancel SMART SET operation.
• SMART SET operation also is cancelled when the MODE button is
pressed.
SMART SET operation
• A simplifi ed set back function enables to recall the preferred (preset) setting with a
single push of the button. Press the button again and you can go back to the
previous setting in an instance.
• SMART SET operation cannot be set on the weekly timer.
• SMART SET operation and SLEEP operation cannot be set at the same time.
Example of use:
1. Low energy mode
Set the temperature 4 to 6°F (2 to 3°C) warmer in COOL and cooler in HEAT
mode. This setting is suitable for unoccupied room, and while you are sleep-
ing.
2. Saving frequently used settings
Save your preferred setting for COOL and HEAT. This enables you to select your
preferred setting with a single push of the button.
page 5 to
.
En-6