Mitsubishi Electric MLZ-KP18NA2 Notice D'utilisation page 10

● OPERATING INSTRUCTIONS ●
C
LEANING
Instructions:
• Switch off the power supply or turn off the breaker before cleaning.
• Be careful not to touch the metal parts with your hands.
• Do not use benzine, thinner, polishing powder, or insecticide.
• When dirt stands out, wash it with kitchen neutral detergent diluted with lukewarm
water to the specifi ed concentration, then wipe off the detergent with a damp towel.
Open
1. Press the tabs on the intake grille.
2. Open the intake grille while holding it.
En-9
• Do not expose parts to direct sunlight, heat, or fl ames to dry.
• Do not use water hotter than 122°F (50°C).
• Do not use a scrubbing brush, a hard sponge, or the like.
• Do not soak or rinse the horizontal vane.
Close
1. Close the intake grille.
• Make sure that the safety strings do not hang out of the intake grille.
Tab
2. Press around the each tab of the intake grille until a "click" is heard and press the
center.
Around tab