Noaton 11045B Mode D'emploi page 28

Notes on remote control:
Use the central control pad to control the colour and intensity of the LED lighting. Press and hold the up /
down arrows to continuously increase / decrease the intensity of the lighting (or press for step change).
Press and hold the left and right arrows to change the colour temperature from warm white (left) to cool
white (right) (or press for step change). The middle button cycles through warm white, daylight white
and cool white lighting.
After pressing the timer button (TIME), the fan automatically turns off after 1 or 2 hours.
Correct location
5
•
The fan blows air downward in a cone shape and pushes it across the floor. Use this
information to choose the most suitable place for the fan, taking into account its
function as a ceiling light.
•
The parameters of the input voltage must meet the parameters provided on the
technical label on the device.
•
Make sure that there are no obstacles near the fan that could impede proper airflow or
collide with the unit (such as the top cupboard door etc.).
6 Maintenance
Before performing any maintenance, turn off the fan and disconnect the power supply (ideally by
disconnecting it in the fuse box of the household). Clean the surface of the device by a soft damp cloth.
WARNING:
•
Do not immerse the fan into water.
•
Do not use chemicals, such as detergents, alcohol, thinners or abrasives, to clean the device.
•
Prevent water from getting into inside of the device, especially on electronic components.
Otherwise, there is a risk of electric shock or damage to the device.
EN
28