Publicité
Les langues disponibles
Les langues disponibles
e Li (Auto Configuration)
Auto
Config
Auto Configuration automatically adjusts image position, clock, and phase.
A confirmation box is displayed. The default selection is [Yes]. Press (2) to ex-
Yes
No
ecute the menu. If you want to cancel, select [No] and press (2).
To save the adjusted value. select [Brightness], then press (2).
@ fir' (Miscellaneous)
Select the item by pressing «qor p , then press (2).
He dion
All values of the OSD menu are set to default.
A confirmation box is displayed. The default selection is [Yes]. Press [2] to ex-
OSD
Position
ecute the menu. If you want to cancel, select [No] and press (2).
OSD Timeout
OSD Timeout is used to set the OSD idle time-out. If no active action, key press or
automatic configuration occurs for the defined period, the OSD menu is closed.
There are four OSD time-out values available.
Select the item by pressing «q or p» . then press (2] .
OSD Position
The sub-menu is displayed.
Select the item by pressing «q or p» . then press (2) .
The sub-menu is displayed.
Adjust by pressing «q or p , then press [2] . (If you want to cancel, press (1))
OSD
Timeout
@ U (Information)
Version:
. V-Freq-:
H-Freq-:
PixelCLk:
Width:
Height:
This menu is used to display information about the system. The OSD window is
displayed for 60 seconds after which control returns to main menu. If (1) is pressed,
the information window is closed and the main menu is displayed.
3 Press (1)
The OSD main menu disappears.
13
Publicité
