Publicité
Les langues disponibles
Les langues disponibles
Fine adjustment on the display size, position, and so on, may be necessary since the signal timing differs depending on the com-
puter.
1 Press (1]
The OSD main menu is displayed.
The OSD window may not be displayed properly when pressing (1).
In this case, press [1] again after waiting for about 10 seconds.
«OSD main menu»
iad
L2 n
O dá t
U
Adjust contrast of selected RGB channel
Set RGB color temperature
Move input image capture window
Adjust clock and phase
Automatically optimize the image quality
Miscellaneous
Miscellaneous settings
Information
Display RGB input signal information
2 Select the icon by pressing <4 or > , then press [2]
@ IL (Brightness)
Adjust by pressing «q or p» , then press (2) . (If you want to cancel, press [1] )
@ © (Contrast)
The Contrast menu item is used to adjust the contrast of the selected RGB channel.
A slider indicates the current contrast value. The range of adjustment is 0 to 255.
Adjust by pressing «q or p» , then press (2) . (If you want to cancel, press (1))
11
Publicité
