Publicité
Les langues disponibles
Les langues disponibles
Adjusting the LCD Monitor
12
@ EI (Color)
Auto
Balance
RGB
Color
Temperature
e HH (Position)
@ J (Image)
Phase
Clock
Auto
Phase
The Color menu is used to adjust the brightness of Red, Green, Blue, or all color
channels.
Select the item by pressing «q or
. then press (2) .
Auto Balance
Select (2) , the color is adjusted automatically.
To save the adjusted value, select [Color Temperature], then press (2).
RGB
The sub-menu is displayed.
© Select the item by pressing «qor p , then press (2) .
The sub-menu is displayed.
(2) Adjust by pressing «q or p» , then press (2) . (If you want to cancel, press (1) )
Color Temperature
The sub-menu is displayed.
Select the item by pressing «q or p , then press (2).
The Position menu allows the adjustment of image position in Analog input mode.
Select the item by pressing «q or p» , then press (2) .
H-Position
H-position is used to adjust the horizontal image position manually. A slider and
the current value are displayed. The adjustment range is 0 to 127.
Adjust by pressing «q or p . then press (2) . (If you want to cancel, press (1) )
V-Position
V-position is used to adjust the vertical image position manually. A slider and the
current value are displayed. The maximum value for Vertical Position is to | to 47.
(Depending on the RGB input signal, the upper value of this range may be below
47.)
Adjust by pressing «q or p» , then press (2) . (If you want to cancel, press (1))
Auto Center
A confirmation box is displayed. The default selection is [Yes]. Press (2) to adjust
the position automatically. If you want to cancel, select [No] and press (2).
To save the adjusted value, select [H-Position] or [V-Position], then press [2].
Select the item by pressing «q or p» , then press (2) .
Phase
Publicité
