Vinotemp EL-300DSWL Manuel Du Propriétaire page 12

The controls of your wine cooler
① Up
② Temperature Display
Used to raise (warm) the set temperature by 1°C or 1°F.
③°C/°F Display
④ Down
⑤ Set Temperature
Used to lower (cool) the set temperature by 1°C or 1°F.
Press this button, press UP/DOWN mark to set temperature. To view the "set" temperature
at any time, touch the UP or DOWN mark, the "set" temperature will temporarily "flash" in
⑥ °C/°F Selector
the LED display for 5 seconds.
⑦ Power
Select the temperature display setting in Fahrenheit or Celsius degree.
To control the appliance, turn on/off. To turn off the appliance, touch the
least 5 seconds. Press
temperature set previously when restart the appliance or reconnect after power cuts.
SETTING THE TEMPERATURE CONTROL
You can select temperature display setting from Fahrenheit to Celsius degree by touching the °C/°F
Selector mark. Fahrenheit or Celsius degrees indicator will appear in blue color in the temperature
display window. You can set the temperature as you desire by touching the UP and DOWN marks.
When you touch the two marks for the first time, the LED readout will show the original temperature
set previously.
12
again, turn on the appliance. The LED readout will show the original
mark and hold for at