All manuals and user guides at all-guides.com
Upgrading the Software
To keep your product up-to-date with new Digital Television features then software upgrades are
periodically broadcast as part of the normal Television signal. It will automatically detect these
signals and display the software upgrade banner. You are given the option to install the upgrade.
1
Insert a USB drive containing the firmware upgrade into
the USB Upgrade Port on the side of the TV.
2
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Setup, then press the
ENTER button.
3
Press the ▲ or ▼ button to select Software Upgrade,
then press the ENTER button.
4
Press the ▲ or ▼ button to select "BY USB", "BY Channel"
or "Standby Mode Upgrade". Press the ENTER button.
BY USB :
− Preset : Insert a USB drive containing the firmware
upgrade into TV.
Please be careful to not disconnect the power or
remove the USB drive while upgrades are being
applied. The TV will turn off and turn on automatically
after completing the firmware upgrade.
Please check the firmware version after the upgrades are complete. When software is upgraded,
video and audio settings you have made will return to their default (factory) settings.
We recommend you write down your settings so that you can easily reset them after the upgrade.
BY Channel :
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade :
To continue software upgrade with master power on, Select On by pressing the ▲ or ▼ button.
45 minutes after entering standby mode, a manual upgrade is automatically conducted. Since the
power of the unit is turned on internally, the screen may be on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until the software upgrade is completed.
Alternative Software :
To display the software version information.
TV side Panel
Current Version
BY USB
BY Channel
Standby Mode Upgrade
Alternative Software
English - 39
USB Drive
Energy Saving
: Off
PIP
Software Upgrade
Common Interface
Software Upgrade
2008/01/01_000075
►
:On
--/--/--_--------
Move
Enter
Return
►