Télécharger Imprimer la page

Num'axes FUG1032 Guide D'utilisation page 15

Masquer les pouces Voir aussi pour FUG1032:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
The table below indicates how your collar operates according to the selected mode:
Number of beep sounds heard when
switching modes
1
4
7
To change the stimulation level, proceed in the following way:
− When switching on the collar, keep the magnetic key in contact with the
Diagram 3). After the beep sound indicating that the collar is on, a series of beep sounds is emitted (from 1 to 8) indicating
the selected level. Levels 1 to 8 run through as long as you leave the magnetic key in contact with the
− Move the magnetic key away from the collar as soon as you have reached the desired level. The collar will memorize your
selected level. Next time you will switch on the collar, it will be in the level you selected last.
Checking and replacing battery of receiver collar
To check the condition of the battery, observe the indicator light located on the front of the receiver collar:
− flashes slowly green: battery sufficiently charged
− flashes quickly red: weak battery. Be prepared to replace battery.
Replace the battery by following the procedure indicated above (see § Fitting the battery in the receiver collar).
NUM'AXES advises to use the same type and same brand of batteries as those supplied in your new purchased
product. Other brands of batteries may not operate, or may not be completely compatible with your product.
You can purchase the suitable batteries from NUM'AXES or from your distributor.
After the battery replacement, the collar will operate according to the last selected mode.
Due to greater use during your dog's training, the first battery may not last as long as replacement batteries. Battery life
depends on how often your dog tests the boundary.
Changing the contact points
Two different series of contact points are supplied. The length of the contact points must be sufficient to have proper contact
with the dog's skin, enabling the device to operate correctly.
If you have a long-haired dog and the short contact points fitted to the collar in the factory are inadequate, remove and replace
them with the long ones supplied with the kit. Carefully tighten them manually (do not use a key).
de collier seul FUG1032+FUG1033 - indice B.indd 15
Mode
1
2
2
3
4
5
5
6
7
8
8
Stimulation level
low stimulation levels:
for small dogs or dogs with sensitive temperament
3
medium stimulation levels:
for medium dogs or dogs with average temperament
6
strong stimulation levels:
for large dogs or dogs with difficult temperament
symbol located on the front of the collar (ref.
15
symbol.
28/06/2018 14:4

Publicité

loading

Ce manuel est également adapté pour:

Fug1033