Num'axes FUG1032 Guide D'utilisation page 13

• Contents of the product
- collar fitted with short contact points
- nylon strap
- lithium 3 Volts CR2 battery for the collar
- magnetic key (magnet)
- neon test lamp
- pair of long contact points
- this user's guide
• Presentation of the product
Nylon strap
Indicator light:
On/Off indicator
battery level indicator
• Fitting the battery in the receiver collar
− Unscrew the 4 screws of the battery cover using a screwdriver.
− Insert the battery (3V Lithium CR2) paying attention to follow polarity
indicated on the battery housing.
− A beep sound is emitted indicating the correct installation of the battery. If
you do not hear any beep sound after having inserted the battery, remove
it immediately from its housing. Check the polarity before trying again.
− Before putting the lid back in place, check that the rubber seal is in its groove.
− Retighten moderately the 4 screws.
de collier seul FUG1032+FUG1033 - indice B.indd 13
Contact points
(short or long)
+
Diagram 1 – Receiver collar
area where the magnetic switch is
This magnetic switch allows you to
turn On/Off the collar and to select the
Battery polarity
indicators
13
symbol:
located.
stimulation level.
Diagram 2
Battery
Seal
28/06/2018 14:4