Num'axes FUG1032 Guide D'utilisation page 14

• Activate/deactivate the receiver collar
The supplied magnetic key allows you to activate/deactivate the collar.
• Activate: move the magnetic key towards the collar so that it comes into contact with the
hold for 1 second (ref. Diagram 3). The collar will emit one beep sound and the indicator light will flash in green indicating
the collar is On.
• Deactivate: move the magnetic key towards the collar so that it comes into contact with the
collar, hold for 1 second (ref. Diagram 3). The collar will emit two beep sounds and the indicator light will flash in red then
go out indicating the collar is Off.
To increase the battery life, we recommend you to deactivate the collar if you are not using it for a long period.
If your dog needs to leave the authorized area, you have to remove the collar or deactivate the transmitter by disconnecting
it from the power supply.
Diagram 3
Activate/deactivate
the receiver collar
with the magnetic key
• Adjusting the stimulation level
8 stimulation levels (modes) are available on each receiver collar so you can adjust the product to your dog (size, sensitivity,
temperament).
In the factory, the collar is set on mode 4.
Always start with a low level of stimulation and define the level from which your dog reacts by increasing gradually.
de collier seul FUG1032+FUG1033 - indice B.indd 14
Magnetic key
(magnet)
14
symbol located on the collar,
symbol located on the
28/06/2018 14:4