Cisco Systems Linksys WAG200G Guide D'installation Rapide page 6

1 RFC 1483 Bridged
Dynamic IP Address
If your ISP says that you are
connecting through a dynamic IP
address (Figure D1), perform these
steps:
a
Select RFC 1483 Bridged for
the Encapsulation.
b
Select Obtain an IP Address
Automatically for the IP Set-
ting.
c
Click the Save Settings button
to save the settings.
Static IP Address
If your ISP says that you are
connecting through a static or fixed
IP address (Figure D2), perform these
steps:
a
Select RFC 1483 Bridged for
the Encapsulation.
b
Select Use the following IP
Address as the IP Setting.
c
Enter the IP Address and the
Subnet Mask.
d
Enter the Default Gateway
address.
6
D
Dynamic
1
D
Static
2