Abus IPCS84511 Manuel Utilisateur Logiciel page 89

Enable WPS:
PIN code:
PBC connection:
PIN code connection:
7.4.3.11 Integration protocol
Enable ONVIF:
(Wi-Fi protected setup) enables the WPS function. There are 2
different methods for using the WPS function (PIN code,
PBC).
generates a new PIN code for using the PIN code method.
(Push Button Configuration) the WPS connection is produced
after a button is pressed on the camera.
a PIN code is generated in the router and entered in the
camera.
here you can disable the camera's ONVIF interface as
required. This interface is enabled by default. The access
data for this interface are the same as the data for the user
"installer".
89