TRENDY
54 04 46xx
Step 5 : Use the parts of step 4, the intermediate
side 4 of step 3 and three wood screws F
Push the intermediate side (4) with its wooden
dowels into the provided holes of the bottom (7).
Push the wood screws (F) through the drillings of
the bottom and tighten into the intermediate side.
Hold the intermediate side.
Kleerkast met twee draaideuren
Schrankwand mit zwei Türen
Step 4 : Use the parts of step 3, both
backs 8 and fourteen eccentrics C
Push six eccentrics (C) into the drillings
at the underside of the bottom (7). Push
four eccentrics (C) in the drillings at the
rear backprofi les (3). Push the left end-
side (2L) with its connectors in the holes
and over the wooden dowels of the bot-
tom (7). Tighten the eccentrics. Push a
back section (3) with its wooden dow-
els into the holes and over the connec-
tors of the side. Tighten the eccentrics.
Place both backs (8) into the grooves of
the backprofi le and the endside. Place a
back section (3) on top of the backs and
push the profi le with its wooden dowels
into the holes and over the connectors of
the endside. Tighten the eccentrics. Push
the right endside (2R) with his connectors
into the holes and over the wooden dow-
els of the bottom and the backprofi les.
Tighten the eccentrics.
Armoire avec 2 portes battantes
Wardrobe with two doors
Quax
Quax
First dreams
First dreams
®
®
First steps
First steps
37