Quax TRENDY Serie Manuel page 35

TRENDY
54 04 46xx
4. Assembling the wardrobe
Step 1 : Use both long crossbars 10, both short crossbars 11, eight eccentrics E, both front legs 12A and
both rear legs 12B and eight connectors D
Push two eccentrics (E) in the provided drillings on the inside of the long crossbars (10) and the short
crossbars (11). Tighten two connectors (D) in the provided holes on the inside of the legs (12A and 12B).
Step 2 : Use the parts of step 1
Push a front (12A) and a rear leg (12B) with its connectors into the holes and over the wooden dowels of
short crossbars (11). Tighten the eccentrics. Push the leg frame with his connectors in the drillings and on
the wooden dowels of the long crossbars (10). Tighten the eccentrics. Repeat with the other leg frame.
Kleerkast met twee draaideuren
Schrankwand mit zwei Türen
Armoire avec 2 portes battantes
Wardrobe with two doors
Quax Quax
First dreams First dreams
® ®
First steps First steps
35