Publicité
Les langues disponibles
Les langues disponibles
that it does not get tangled with branches and other
cutting edges and also ensure it is not dangling across
the working area. The cable elongator must always be
behind the machine and the end user.
6.3.3. START UP AND STOPPAGE
Start up of the machine:
Press the security button (A) and without letting go of
it, pull upwards the bottom switch On/Off (B). Once it
has started, let go of the security button (A).
Stopping the machine:
Let go of the bottom switch On/Off (B).
A
B
6.3.4. POINTS TO BE VERIFIED AFTER MACHINE
STARTS
It is neccesary to pay attention to posible loosening
or overheating of parts of the machine. If you detect
any anomalies stop inmediatly the machine and check
it carefully. In case of failure take the machine to
the repair service. In any case you should continue
working if you feel that the performance is not correct.
Do not use the machine if it is damaged or
incorrectly regulated.
7. MACHINE USAGE
Use this machine only for jobs for which it has
been designed. The use of this machine for any other
jobs is dangerous and can cause dangers to the users
and/or to the machine.
Do not use this machine at night, with fog or with
reduced visibility. You must be able to see and control
the working area.
Avoid using the machine when the ground is humid.
Be particularly careful if using the machine after it has
rained as you might slip more easily. Should you slip
or fall, let go of the handle immediately.
Do not use this machine if fatigued, sick, if you have
had medicines, drugs or alcohol.
Lack of sleep or fatigue can cause accidents and
damages.
Always regulate the machine on a flat and stable
surface.
Do not use this machine on slopes where your safety
is not guaranteed. If you are working on a sloped
surface, slow down and make sure you are well
balanced and stable.
Do not get near the cutting elements of the machine
when the machine is functioning.
Do not rely solely on the warning signs on the
machine. Be always alert.
It is neccesary to pay attention to posible loosening
or overheating of parts of the machine. If you detect
any anomalies stop inmediatly the machine and check
it carefully. In case of failure take the machine to
the repair service. In any case you should continue
working if you feel that the performance is not correct.
Remember to always use the machine with clean
hands and without oil.
Clean the work area and eliminate any obstacles that
could cause accidents.
33/120
English
Publicité
