Garland XTRIM 700 PE-V16 Manuel D'instructions page 26

English
Never use this machine with the cable or plug
damaged. Before connecting the machine check the
plug and cable for possible damages. If you see any
damages, send the machine to your nearest service
agent for its repair. If the cable is damaged or broken,
unplug immediately. Damaged cables or tangled
cables increase the risk of electric shock.
The substitution of the plug or cable should always be
done by the manufacturer or the service agent.
We recommend that the machine is connected to a
residual differential device whose current is less or
equal to 30mA. This device should be checked prior
to every use.
Never use a damaged connector or a damaged
cable extension and ensure that it complies with the
required normative and for the specific requirements
of this machine.
When using a cable extension, make sure it has
a minimum section of 1,5 mm
25 metres in length and ensure it is adequate for
outdoor use. Both the plug and the cable extension
should be waterproof and should not be submerged.
The use of an adequate cable extension for outdoor
use reduces the risk of electric shock.
Place the cable extension ensuring it does not tangle
with branches or other obstacles and maintain the
work place clean of objects. The cable extension
should always be behind the end user.
Always position the extension cord on the hook that
exists on the machine.
Keep the cord always away from the blade.
Do not use the machine if the ¨open¨ and ¨close¨ switch
does not work. Any electric machine that cannot be
controlled is dangerous and must be repaired.
2 , no longer than
26/120
Always disconnect the plug from the mains before
carrying out any maintenance work on the machine.
Only manipulate this machine when disconnected.
2.5. USE AND CARE OF THE MACHINE
Only use this trimmer to cut grass. Any other
use could be dangerous and at your own risk.
Do not use the brush cutter for other jobs for which
it has not been designed. For example: do not use
the brush cutter to cut logs or other wooden objects,
plastic materials, bricks and construction materials.
The use of this brush cutter for jobs different to those
stipulated can create dangerous situations.
Use this machine and its accessories according to
the instructions provided and taking into account
working conditions and work to be done. The use of
this machine for jobs different to those stipulated can
cause danger.
Check that all security elements are installed and in
good working condition.
Remember that it is the end user operating the
machine who is responsible for any danger or
damages caused to other people or things. The
manufacturer will not in any case be held liable for
damages caused by an incorrect use of this machine.
Keep all parts of your body away from the cutting tool
during operation.
Do not force the machine over its capacity. Use the
machine for the correct job. The use of the machine
for its proper job, will ensure that you work better and
more safely.
Do not use this machine if the open and closed
switch does not work. Any machine that cannot be
controlled by the open and closed switch is dangerous
and must be repaired.