Hoover HL54WE Mode D'emploi page 9

All manuals and user guides at all-guides.com
2. CORRECTLY POSITIONING
Well Ventilating
There is need of good ventilation around the refrigerator for easy dissipation of heat, high efficiency of refrigeration
and lo w po wer consumption. For this purpose, sufficie nt clear space should be need around the refrigerator. I ts
back is at least 100mm away from the w all, its sides at least have a space of 100mm separately and the height
from over its top is not less than 200mm. A clear space should be left to open its doors to 160°.
Power Supply
The refrigerator is only applied with po wer su pply of sin gle phase alternating c urrent of (220-
240)V~/50Hz;230V~/60Hz. I f fluctuation of voltage in th e district user is of so large that the volta ge e xceeds th e
above scope, for safety sake, be sure to apply a.c. automatic voltage regulator to the refrigerator. The refrigerator
must employ a special po wer socket inst ead of comm on one with o ther electric a ppliances. Its plug must ma tch
the socket with ground wire.
Power Line Cord
The cord should be neither lengthened nor folded into coil during operation. Moreover, it is forbidden that cord
is kept close onto the compressor at the back of the refrigerator, the surface temperature of which is quite
high when operating. Touching with it would deactivatethe insulation or cause leakage for electricity.
Protection from Moisture
Avoiding placing the refrigerator in a place where heavy moisture is present so as to minimize possibility of rusty
for its metal parts. Still more, the refrigerator is forbidden to be directly sprayed by water, otherwise, poor insulation
and current leakage would occur.
Protection from Heat
The refrigerator should be far away from any heat source or direct sunshine.
3