Olympia ECS 415.4 CCD Mode D'emploi page 20

5.2 ECS function (automatic EcoShred operation)
2
When the ECS function is activated, the shredding operation of the cutting mechanism
starts up as soon as material is inserted in the respective infeed slot:
The device switches to forward drive and draws the material in.
●
5 seconds after shredding is finished, the device switches off automatically.
●
The ECS function is activated by pressing the ECS button. The ECS button then lights up
blue.
When the ECS function is activated, paper can be shredded via the paper
Note:
infeed and CDs, DVDs and credit cards shredded via the CD infeed. Only
one infeed may be used at a time. If you use more than one infeed, the
device stops. Pay attention to the permissible quantity of material which
can be shredded.
When the ECS function is activated, the device has a very low power con-
Note:
sumption.
5.3 Shredding paper
A maximum of 15 sheets of A4 paper with a weight of maximally 70 g/m
Note:
may be inserted in the paper infeed at a time.
Remove any other material from the paper, such as paper clips or labels.
Note:
1. The device is switched on and the ECS function is activated.
2. Insert paper in the paper infeed.
5.4 Shredding CDs, DVDs or credit cards
Only insert 1 CD, DVD or credit card at a time for the shredding process.
Note:
1. The device is switched on and the ECS function is activated.
2. Insert the CD, DVD or credit card in the CD infeed.
If, for security reasons, you want to shred credit cards using particle-cut
Note:
(cross-cut), you can also feed credit cards into the shredder's paper infeed.
This only applies for credit cards and not for CDs/DVDs!
5.5 Emergency stop
If the ECS function is activated or forward or reverse operation are on, you can stop the
device immediately in an emergency situation by pressing the ECS button.
5.6 Switching the device off
Set the On/Off switch to its OFF position.
2
Abbreviation for EcoShred
All manuals and user guides at all-guides.com
20
2