Homelite UT43104 Manuel D'utilisation page 9

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert
Read Operator's Manual
Wear Eye, Hearing, and
Head Protection
Wet Conditions Alert
SAFE-T-TIP Nose Guard
Operate With Two
Hands
One Handed
Kickback
Bar Nose Contact
SYMBOLS
MEANING
Indicates a hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation, that, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates information considered
important, but not related to a potential injury (e.g. messages
relating to property damage).
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this product.
Wear eye protection with side shields marked to comply
with ANSI Z87.1 as well as hearing and head protection
when operating this equipment.
Do not expose to rain or use in damp locations.
The SAFE-T-TIP nose guard on the guide bar helps
prevent kickback.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
DANGER! BEWARE OF KICKBACK.
Avoid bar nose contact.
Page 9 — English
DESIGNATION/EXPLANATION