Airzone Aidoo Pro AZAI6WSPMB2 Guide Rapide page 13

Indoor unit information
Manufacturer*.
Thermostat units*. Allows you to configure the temperature in °C or °F.
Reference*. Allows you to load a new Modbus object map or modify the one already loaded on
the device.
Zone temperature*.
Return temperature*.
* Not available in Bluetooth configuration.
AIRTOOLS SETTINGS ON AIRZONE CLOUD
Digital input
Allows you to activate or deactivate this function and change:
•
Activation. Allows to set the input as:
a.
Activation by state: the state is persistent, if the input is activated the machine will be
forced off until it changes state.
b.
Activation by edge: the status is punctual, only the on/off is sent when the opening or
closing condition is met for the first time.
•
Settings. Allows you to set the input as normally open or normally closed.
•
Time to turn off (minutes). Displays a drop-down for selecting the time (in minutes) that
you want to elapse before turning off the equipment after receiving the signal. If disabled,
the equipment will automatically turn off after receiving the signal.
•
Time to turn on (minutes). Allows you to select the time (in minutes) that must elapse with
the signal deactivated before the equipment turns on again. This setting only turns on
the equipment if it has previously been turned off. If it is disabled, the equipment must be
switched on again manually.
EN
13