Télécharger Imprimer la page

Qlima VDFSF840rc Manuel D'utilisation page 27

Publicité

Les langues disponibles

Les langues disponibles

A: MIST BUTTON
1.
Press the "Mist" button to switch the ultrasonic mist and off. Adjust the mist
volume (Max-medium-minimum) by pressing the "Mist" button several times.
2.
When the mist function is selected, the water tank indicator light will be illu-
minated blue.
3.
If the water tank is empty (or short of water), the water indicator light will be
illuminated red.
4.
The mist function and fan function can be worked independently or toge-
ther.
B: TIMER BUTTON
Press the "Timer" button when the fan is on. The indicator will show the
time remaining until the fan is due to switch off. You can select the length of
time the fan will be in operation from spans ranging from 0.5 to 7.5 hours in
0.5-hour increments. Press the TIMER button repeatedly, and the sum of the
values of the lights is the remaining time until shut down.
C: ON/SPEED BUTTON
1.
Use the "ON/SPEED" button to switch the fan ON.
2.
Set the fan speed from three options (High-Medium-Low) by pressing the
"ON/SPEED" button several times.
D: MODE BUTTON
1.
The wind mode can be adjusted by pressing the "MODE" button.
2.
Normal: The fan will operate in High, Medium or Low mode as set.
3.
Natural: The fan will operate at low, medium and high speeds in different
patterns to provide a wind flow that replicated natural airflow.
4.
Sleeping: Sleep mode can operate at low, medium and high speeds. In sleep
mode, the wind speed will decrease in set patterns before operating at a low
speed until shut down.
E: OFF BUTTON
Press the "OFF" button to switch the fan off.
F: SWING BUTTON
1.
When you press the "SWING" button, the mist fan head will move continu-
ously from side to side. Pressing the button again will stop the oscillation of
the mist fan.
2.
You can adjust the wind angle up and down manually.
G: REMOTE CONTROL
The above functions can be controlled using
the remote control by pressing the
corresponding function buttons. To use the
remote control, insert two AAA 1.5V
batteries in the battery housing in the remote
control.
4
27

Publicité

loading