Qlima VDFSF840rc Manuel D'utilisation page 25

4. Take the plastic nut and screw on to secure the grille.
5. Place the fan blade onto the motor spindle.
NOTE: the groove in the rear centre of the fan blade aligns with a T-bar on the
motor spindle to ensure correct positioning.
6. Fix the blade into place by gently hand tightening the spinner anticlockwise
onto the end of the motor spindle. The spinnernut is self-tightening when
the motor starts so do not force it, just nip it up.
7. Fit locating tab on the front grille over the rear grille at the top.
8. Open up all locking clips on the front safety grille by rotating outward.
4
25