Qlima VDFSF840rc Manuel D'utilisation page 24

If you fail to consult and/or follow up the
rules, instructions and explanation, the
warranty will no longer be valid, and the
manufacturer will no longer deal with
any damage to the appliance and/or your
environment under the warranty.
ASSEMBLING THE MIST FAN
4
24
The manufacturer is not responsible for any harm or damage if attention is
not paid to the points described above.
The use of this product and the elements required for that purpose is enti-
rely at the end user's own risk.
FAN ASSEMBLY
1. Align the two supporting tubes into the holes of the base, then fix in place
from the bottom using the screws provided.
2. Loose the two bolts located at the back of the unit (do not fully unscrew
the two nuts or they will fall off). Fix the motor unit to the tubes and
retighten the nuts
3. Place the back grille over the threaded section on the fan head, ensuring
the wire handle on the back of the grille it at the top.