Nakayama FM1100 Manuel D'instructions page 4

EN
Follow the steps below to start the grinding process:
1. Check that the machine is switched off.
2. Remove the rotor (3) and the sieve (4).
3. Close the inlet valve (2).
4. Insert the tray (5) and insert the funnel.
5. The machine is now ready to grind the materials.
Materials can be imported from the loading funnel (1) to be processed. For a
better placement of the material in the funnel, use a push rod. When finished,
switch off the machine and clean up any debris and accumulated dust.
MAINTENANCE AND STORAGE
Maintenance
Carry out regular maintenance of the machine only after unplugging it from the power supply.
The machine should be cleaned at regular intervals from dust and dirt residues. Make sure to clean internal surface of the working chamber from the residues
of grain after each usage of the machine.
The use of solvents as a cleaning agent can cause damage to the plastic parts of the machine.
Maintenance and repair of this machine should only be carried out by authorised technicians. Maintenance carried out by non-qualified personnel may lead
to instrument damage and personal injuries.
When repairing the machine, use only genuine parts and accessories. Use of non-recommended spare parts and accessories may lead to serious injury.
Caution! Modifying the machine or disassembling it will void its warranty.
Rules of operation and service life
Before operating the machine for the first time and after long periods of inactivity, the machine should be operated for 10 minutes without load.
Before each use make sure to check the condition and security of all bolted connections.
Storage
Before storage, clean the machine thoroughly and make sure that the ventilation slots are clean and open.
The machine should be stored indoors, in a dry , closed area, with temperatures from -2 0C to 40 0C.
In order to prevent the electric motor from malfunctioning, after having brought the machine from the cold into the working area, you should leave it for at
least 10 hours without operating it.
Do not get the machine wet and do not store it in a place with too much humidity. In the event of condensation, do not use the machine until the moisture
has completely dried.
4
WWW.NIKOLAOUTOOLS.GR