Napoleon TDS50 Serie Manuel D'installation Et D'utilisation page 29

5
7
9
SAFETY SCREEN
When opening the fi re viewing door, a simple procedure must
be followed in order to not damage the door. First open the
valve control door. Next open both side doors fully. Pull the latch
handles towards you and release each catch. The door may now
be safely opened. To close the door, repeat in reverse order.
There may be instances that require adjustment of the door
latches to ensure a tighter seal. To do this simply loosen and tighten each catch until both latches snap closed
when securing the door.
X4
6
8
10
CATCH
fi nishing
SAFETY SCREEN
HANDLE
W415-2886 / 04.14.20
EN
29