Look R38D Manuel page 10

EN
CONGRATULATIONS !
Dear customer,
Congratulations, you have chosen the LOOK CYCLE R38D wheels for your bicycle. Please read this user
manual carefully as it contains important importation regarding the installation, use and maintenance of
your new wheelset.
Proper use and regular maintenance of your wheel(s) and accessories will increase the lifespan of the
product(s).
LOOK products are protected by industrial property rights.
For more information, please refer to www.lookcycle.com/patents
IMPORTANT INFORMATION
WARNING : This LOOK product has been
!
designed and manufactured to be used
exclusively on road bikes with disc brakes, and to be
ridden solely on smooth, paved and well-maintained
roads (ASTM CATEGORY 1, road only).
Any other use of this product such as off-road,
gravel, cyclo-cross, tandem, with a trailer (travel
or children's trailer), or use on roads or paths in
poor condition could damage the product, cause it
to malfunction, or result in a serious or even fatal
accident.
Please check the compatibility of this product with
your frame, tires and braking system by visiting our
website or contacting your local LOOK retailer.
18
NOTE : This wheel is only covered by warranty if
used in conjunction with the original, approved rim
tape, original, approved valve assembly and liquid
sealant or an inner tube.
SAFETY PRECAUTIONS
!
Before riding your bicycle :
• Check that the threads of your thru axles are
greased to ensure optimal tightening - refer to the
manufacturer's instructions (axle or frame).
Check that your thru axles are properly tightened
according to the bike manufacturer's torque
specifications.
• Check the pressure and condition of your tires,
ensuring that the inflation pressure is suitable for the
type of tire and wheel(s) you are using.
• Check your rims for damage.
• Check that the spokes are in good condition, and
that they are not damaged or slack.
• Check that your brake rotors are correctly secured
to the hubs and are not greasy or bent.
!
General instructions
• Do not remove the stickers on the rim listing the
use and safety instructions.
• Follow the regular maintenance guidelines.
• Only use original LOOK or CORIMA spare parts.
• Do not perform any work or alterations on your
wheels such as drilling, sanding etc...
• Any parts damaged as a result of impacts or
accidents must be replaced by LOOK or CORIMA
spare parts, not repaired.
• Braking distances are increased in rainy conditions
or on wet roads. Please bear this in mind and
anticipate your braking accordingly!
• In case of a puncture, stop immediately to avoid
riding with a flat tire and damaging the carbon rim.
• The combined weight of the cyclist and bike must
not exceed 100 kg.
If any suspicious or abnormal noise should appear,
stop immediately and inspect your bike.
• LOOK CYCLE recommends that you wear an
approved protective helmet and that you comply
with the traffic laws of the country in which you are
riding.
EN
19