Publicité
Les langues disponibles
Les langues disponibles
may cause loss of control.
• Always run the drill on its lowest speed
and with the clutch torque adjusted to its
lowest operable setting. Failure to do so
may cause damage to the drill or the tool
attachment.
• Ensure that the drill chuck is tight
frequently throughout use. If the chuck is
not secured, it may slip and cause dam-
age to the unit, drill, or user.
• Always put the drill switch in its locked
position and disconnect battery before
transporting the tool.
CHILDREN
Tragic accidents can occur if the operator
is not alert to the presence of children.
Children are often attracted to the equip-
ment and its activity. Never assume that
children will remain where you last saw
them.
• Keep children out of the working area
and under the watchful care of a respon-
sible adult.
• Be alert and turn equipment off if chil-
dren enter the area.
• Before and while moving backwards,
look behind and down for small children.
• Never allow children to operate the
equipment.
• Use extra care when approaching blind
corners, shrubs, trees, or other objects
that may obscure vision.
• Inspect equipment before storage.
When not in use, disconnect the drill and
store indoors in a dry place locked or
otherwise inaccessible to children.
Get parts online at www.fusiondrillpowered.com or call 800-345-6007 M-F 8:00am-4:30pm CST.
Model Number:
SERVICE
• Always disconnect the drill whenever
you leave the equipment, before clean-
ing, repairing, or inspecting the unit.
Never make adjustments or repairs with
the drill attached.
• Always wear eye protection when mak-
ing adjustments or repairs.
• Never tamper with safety devices. Check
their proper operation regularly.
• Stop and inspect the equipment if
an object is struck. Repair, if necessary,
before restarting.
• Clean and replace safety instruction
decals as necessary.
• Use only original equipment, accesso-
ries, and authorized replacement parts.
SAFETY DECALS AND WARNINGS
Pictured below are safety and hazard
symbols on the unit or in this manual.
Before you operate your unit, learn and
understand the purpose for each symbol.
Dress appropriately and wear
sturdy footwear.
Avoid injury from
rotating tines.
Wear eye protection
at all times.
Read and understand the operator
manual before running tool.
Do not operate when children
or others are around.
Drill-Powered Cultivator
33061
7
Publicité
