Marantz professional Sound Live 12 Guide D'utilisation page 5

12. DFX Knob: Adjusts the post-fader level of the signal sent to the mixer's effects processor,
whose level is controlled by the DFX Return Fader (DFX Rtn).
13. Channel Pan / Balance: If this knob is labeled Pan, it adjusts the (mono) channel's position
in the stereo field. If the knob is labeled Bal, it adjusts the balance between the left and right
channels of that stereo signal.
14. Channel Mute: Press this button to mute/unmute the channel. The LED next to the button
will light up when the channel is muted.
15. Channel Fader: Adjusts the audio level on the channel.
16. Signal LED (Sig): Indicates that the channel's incoming audio signal is within an optimal range.
Main Controls
17. Aux Send: Use 1/4" (6.35mm) TRS cables to connect
these outputs to the inputs of an external amplifier or
active monitor. Use the Monitor Knob (Mon) on each
channel to control the level of the signal sent to Aux
Send 1. This is useful for creating a custom monitor mix
for onstage musicians.
18. Aux Return (Aux Rtn): Connect the outputs of an
external device to these inputs with 1/4" (6.35mm)
mono cables. If your source is mono, plug it into the left
jack and it will be heard on both the left and right sides.
19. Aux Return Fader (Aux Rtn): Controls the audio level
sent into the Aux Return (Aux Rtn) inputs.
20. Graphic Equalizer: When the EQ On/Off switch is on
(depressed), you can use these controls to adjust the
equalization of the main mix.
21. EQ On/Off: Enables or disables the Graphic Equalizer.
22. Main Out / Monitor Out: When this button is raised, the
Graphic Equalizer will affect the signal sent to the Main
Mix Outputs. When this button is depressed, the
Graphic Equalizer will affect the signal sent to the Aux 1
(Mon) Output.
23. Effect Selector: This knob determines what effect the
mixer's internal effects processor will apply to the
various channels. Turn the knob to change the effect
number, and push the knob to select it. The display next
to the DFX Mute button will show the preset number.
Each channel can send different levels of audio to the
processor by adjusting its DFX Knob. See the
section for an explanation of the available effects.
40
18
17
18
17
21 22
25
23
33 31 29
32 30
34
14 14 14 14
26 19 35 36
Effects
27
28
20
39
24
38
37
5