Power Fist 9124124 Mode D'emploi page 6

9124124
9. Install the front doors (Fig. 9).
Hold the hinge of the left front
door (#16) against the left side
doorframe. Align the bolt holes
and insert an M4 x 10 screw (#8).
Repeat with remaining hinge
openings (Fig. 10).
10. Repeat with the right front door
(#17).
11. Each cabinet comes with two
anti-tipping straps (#18). Screw a
strap into each rear top corner (Fig.
11).
12. Tighten all the screws in the cabinet.
13. Move the cabinet into the chosen
location in the room.
14. Check the cabinet is level. Use a small bubble level to check the level
from side-to-side and back-to-front.
15. Adjust the level by turning one or more adjustable legs (#3) clockwise
to extend them or counterclockwise to retract them until the cabinet is
level.
16. Position each anti-tipping strap (#18) at a 45º angle away from the
cabinet and attach it to the wall with a screw (not included).
6
2-Door Floor Cabinet
For technical questions call 1-800-665-8685
Figure 9.
V1.0
Figure 10.
Figure 11.