Publicité
Les langues disponibles
Les langues disponibles
9124124
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific
function. Do not modify or alter this tool or use it for an
unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Do not exceed the shelf or cabinet weight capacity.
4.
Remove the contents before moving the floor cabinet to avoid tipping.
5.
Make sure the anti-tipping straps are installed properly to avoid an
impact injury from a loaded cabinet falling on you.
6.
Always place the device on a hard, level surface capable of supporting
the load. Allow enough clearance around the device and the load for
movement.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Do not fully tighten the screws until assembly is complete to avoid
misaligned panels or components.
1.
Install each mounting bracket (#2) onto the
bottom panel (#4) with four M6x12 screws
(#1). Fully tighten these screws (Fig. 1).
2.
Screw an adjustable leg (#3) into each
mounting bracket. Only screw half-way in,
as you may need to level the cabinet after
assembly (Fig. 1).
4
2-Door Floor Cabinet
For technical questions call 1-800-665-8685
V1.0
Figure 1.
Publicité
