Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY
ATTACHING THE HOSE RETAINER AND
TRIGGER HANDLE HOLSTER
See Figures 7 - 8.
l Align the posts on the hose retainer with the holes in the
frame.
l Press the hose retainer onto the frame and push the posts
into the hole.
l Install screws and tighten securely.
l Place the trigger handle holster on the back of the handle
as shown.
l Install screws and tighten securely.
CONNECTING THE LANCE TO THE
TRIGGER HANDLE
See Figure 9.
l Push the lance into the trigger handle and turn clockwise
to tighten. Do not overtighten.
l Gently pull on the lance to be certain it is secured.
l If desired, place the nozzles, trigger handle, lance, and
power cord in their storage areas.
12 | English
FIG. 7
B
B
B
B
A - Hose retainer
B - Screws
FIG. 8
A - Trigger handle holster
B - Screws
FIG. 9
B
A - Trigger handle
B - Lance
A
A
B
B
A
Publicité
