Publicité
Les langues disponibles
Les langues disponibles
OPERATION OF THE APPLIANCE
Use the induction cooking zones with suitable cookware.
After mains voltage is applied, all displays come on for a moment. Fallowing this, the cooktop is in
the stand-by mode and it is ready for operation.
The cooktop is controlled with electronic sensors which are operated by touching the related
sensors. Each sensor activation is followed by a sound signal (buzzer).
Switching the appliance on:
Switch the
cooktop
on by touching ON/OFF key
bottom right dots blink. (If no cooking-zone is selected within 20 seconds, the hob will automatically
turn off.)
Switching the appliance off:
Switch the
cooktop
off at any time by touching
ON/OFF key
has always priority in the switch off function.
Switching the cooking-zones on:
Touch the zone selection key you wish to cook on. There is a static dot indication on the selected
zone
display and the blinking dot on all other displays extinguish.
Select the temperature setting by using the increase heat setting
key
. The element is now ready to cook on. For quickest boil times, select desired cooking
level and then touch the P key to activate Boost function.
Switching the cooking-zones off:
Select the element you want to switch off by pressing the zone selection key. Using
the temperature down to ''0''. (Also using
''0'')
If the cooking zone is hot, "H" will be displayed instead of "0".
. All heater displays show a static "0" and the
.
and
keys simultaneously turns the temperature to
6
key or decrease heat setting
key, turn
Publicité
