Publicité
EN
Functional Description and Specifications
The following numbering refers to the illustration of the machine
indicated on page 2.
1
ON/OFF switch
2
Tool chuck
3
Bolt-on handle
4
Inspection window / Oil filler opening
5
Additional handle
6
Main handle
Technical Data
Model
BDH3600
Rated Voltage/
230V~50Hz
Frequency:
Input Power:
1700w
Impact Force:
60J
Weight:
14,5Kg
The electric motor has been designed for a specific voltage only. Always check that the power supply corresponds to
the voltage written on the rating plate.
Assembly Instructions - Main Adjustments
Before using the tool, please read all the instructions.
Additional Handle *
For safety reasons you must only use the demolition hammer with the additional handle provided with the machine.
The additional handle helps you to achieve better stability whilst using the machine.
The additional handle can be set into any required position. To set the position of the additional handle undo the lock of the
auxiliary handle.
Then set the handle at a comfortable working position and tighten the lock again.
Bolt-On Handles *
Install the handle / additional handle using the provided bolts and Allen wrench.
Inserting the tool
Clean the chisel spindle and lubricate lightly the connection surface prior to using
the tool. Pull and turn the lock 180°clockwise.
Insert the drill spindle in the hexagonal housing, the slot on the lock side.
Pull and turn lock 180° anti-clockwise.
Pull the drill spindle to check that it has a displacement of about 3cm.
Removing the tool
To remove the tool follow the steps described in the previous chapter in reverse order.
5
BPH2200
230V~50Hz
2100w
85J
22,5Kg
WWW.NIKOLAOUTOOLS.GR
* The accessories illustrated or
described are not included as
standard delivery.
Publicité
