3.7 Viewing Previously Recorded Values
The blood pressure monitor automatically stores your measurements with time and date. It can store up to 120
measurements for each of the 2 users. When more than 120 measurements are made, the oldest readings are
deleted for that particular user to make space for the new ones.
To view the previously stored values, press the
the measurement are also displayed with the reading. Press the
that are recorded on the device.
Note: Blood pressure measurements are not stored when an error is encountered during
measurement.
3.8 Clearing All Values
If you are sure that you want to permanently remove all stored values, hold down the
button (the instrument must have been switched off before hand) until the "CL" appears
and then release the button. If you do not want to clear the values, press the
permanently clear the memory, press the
cannot be cleared.
3.9 Discontinuing a Measurement
If it is necessary to interrupt a blood pressure measurement for any reason (e.g. the
patient feels unwell), the
immediately lowers the cuff pressure automatically.
3.10 Using the AC Adapter
You may also operate this monitor using the included AC Adapter (output 6V DC/600 mA with DIN plug). Use only
the included AC Adapter to avoid damaging the unit.
1. Ensure that the AC Adapter and cable are not damaged.
2. Plug the adapter cable into the AC Adapter port on the blood pressure monitor.
3. Plug the adapter into your electrical outlet.
When the AC adapter is connected, no battery current is consumed.
Note: No power is taken from the batteries while the AC adapter is connected
to the monitor. If electrical power is interrupted, (e.g., by accidentally removing
the AC adapter from the outlet), the monitor must be reset by removing the plug
from the socket and reinserting the AC adapter connection.
button. The last measurement is displayed. The date and time of
button while "CL" is flashing. Individual values
button can be pressed at any time. The device then
button repeatedly to view all the measurements
button. To