Bosch 060395230C Notice Originale page 14

14 | English
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Do not touch any application tools or adjacent housing
u
components shortly after operation. These can become
very hot during operation and cause burns.
The application tool may jam during drilling. Make
u
sure you have a stable footing and hold the power tool
firmly with both hands. Otherwise you could lose con-
trol of the power tool.
Take care when carrying out demolition work using
u
the chisel. Falling fragments of the demolition material
could injure you or any bystanders.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact
in wood and metal, as well as for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS-Quick/hexagonal tool holder
(2) Dust protection cap
(3) Locking sleeve
(4) "Drilling/hammer drilling" selector switch
(5) Right rotational direction indicator
(6) Left rotational direction indicator
(7) Rotational direction switch
(8) On/off switch
(9) Battery charge indicator
1 609 92A 84W | (18.07.2022)
(10) Battery a)
(11) "PowerLight"
(12) Universal bit holder a)
(13) Screwdriver bit a)
(14) Screwdriver bit with ball catch
(15) Drill bit with hexagonal shank
(16) Drill bit with SDS-Quick tool holder
(17) Handle (insulated gripping surface)
(18) Battery release button
(19) Keyless chuck a)
(20) Front sleeve of the keyless chuck
(21) Rear sleeve of the keyless chuck
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless rotary hammer
Article number
Rated voltage
Rated speed A)
Impact rate
Impact energy per stroke ac-
cording to
EPTA-Procedure 05:2016
Tool holder
Max. drilling diameter
– Concrete
(with twist drill bit)
– Steel
– Wood
– Wood
(with flat milling drill)
Weight according to
EPTA-Procedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation B) and
during storage
Recommended rechargeable
batteries
Recommended chargers C)
A) Measured at 20–25 °C with rechargeable battery PBA 18V
2.5Ah.
B) Limited performance at temperatures < 0 °C
C) The following chargers are not compatible with the PBA re-
chargeable battery: AL 1814 CV, AL 1820 CV, AL 1860 CV
a)
a)
a)
a)
a)
Uneo Maxx
3 603 J52 3..
V= 18
min -1 0–900
min -1 0–5 000
J 0.6
– SDS Quick
– Hexagonal
mm 10
mm 8
mm 10
mm 20
kg 1.4
°C 0 to +35
°C –20 to +50
PBA 18V...W-.
AL 18...
Bosch Power Tools