Smartwares C904IP.2 Mode D'emploi page 20

4.2. Settings for smartphone use
Attention! To use the "ELRO INSTALL" App, you need a smartphone with internet
access.
To set up your camera using Android, go to section 4.2.1.. To set up your camera using iOS,
go to section 4.2.2..
4.2.1. Android
• Download the App: "Elro Install" via Google Play and install it.
• Start the App. The start screen of the app appears.
• Press the "Click here to add camera" option. The "Add camera" menu appears.
• Press the "Scan" button.
can also choose to manually enter the code behind "UID".
under the QR code on your IP camera.
• Next, enter the code: 000000 after "Security code".
• After "Name" enter the name you want to assign to the camera.
• Then press the "OK" button.
Your camera has been added to your phone and will appear on the start screen of
your App. On this you can see if the camera is connected (ONLINE)
N
connected (OFFLINE).
4.2.2. iOS
• Download the App "Elro Install" from the App Store and install it.
• Start the App. The start screen of the app appears.
• Press "Add camera".
• Press the "QR code" button.
T
• You can also choose to manually enter the code of your camera. To do this, press the
"Add" button.
S1
this code under the QR code on your IP camera.
• Next, enter the code behind "Password": 000000.
• After "Name" enter the name you want to assign to the camera.
• Then press the "Save" button.
Your camera has now been added to your App and will appear on the home screen of
your App. Here you can see if the camera is connected ONLINE)
V
(OFFLINE).
4.2.3. General
• For instructions on placing your camera go to section 4.6.
• For instructions on using your camera with the App go to chapter 5.
4.3. Install your camera on your PC
• Insert the included CD-ROM into your computer.
• Launch "IPCamSetup.exe" from the CD-ROM.
• Go through the installation by double clicking on "Next".
• Complete the installation by clicking on "Restart computer".
20
Next, scan the QR code on the bottom of your camera. You
M1
M4
The "Add camera" menu appears.
S3
Next, scan the QR code at the bottom of your camera.
S2
Next, enter the code of your camera behind "UID".
U1
L
You can find this code
M2
M3
or if it is not
N1
S
You can find
U2
U3
or not connected
V1
M