Candy CC2 66T Manuel D'utilisation page 11

All manuals and user guides at all-guides.com
40003540Eng.qxd 07/07/2005
Controls and indicators
Empty Water
Indicator
(Réservoir Plein)
Acrylics/ Synthetics
Button
(Séchage Délicat)
Control panel and indicator lights
Programme Selector – Select the required programme
Marche/Arrêt button and indicator – Press to switch on, the indicator will light
Départ – Press Départ to commence the selected drying programme. Press for 5 seconds
to cancel/reset the programme
Séchage Délicat button – Press to reduce the heat level for delicate items, the indicator
above the button will light up. To change the heat setting the programme must be reset
Low Heat – Indicator light ON
Réservoir Plein indicator – lights when the water container is full
Entretien Filtre indicator – lights when the filter needs cleaning
Départ Différé button – Allows the user to delay the start of the drying cycle (see details
of operation page 16)
Temps Restant Display
START – When the dryer is switched On the START indicator will flash, when the
programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion of the
programme
15' - Indicator lights when there is less than 15 minutes left until completion of the
programme. At this stage of the drying cycle the machine enters the Cool Down phase
STOP - Indicator lights when the programme is finished.
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
10:25 Page 11
Time Remaining Filter Care
Display Indicator
(Temps Restant) (Entretien Filtre)
Start Button Start Delay
(Départ) Button
(Départ Différé)
High Heat – Indicator light OFF
On/Off Button PROGRAMME
(Marche Arrêt) SELECTOR
11