Publicité
Les langues disponibles
Les langues disponibles
9124140
SPECIFIC SAFETY PRECAUTIONS
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
1.
Use the correct tool for the job. This tool was designed for a specific function.
Do not modify or alter this tool or use it for an unintended purpose.
2.
Do not use the tool if any parts are damage broken or misplaced.
Repair or replace the parts.
3.
Do not exceed the shelf or cabinet weight capacity.
4.
Make sure the wall is strong enough to support the weight of the fully
loaded cabinet.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the parts list are included.
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included Parts List.
Do not fully tighten the screws until assembly is complete to avoid
misaligned panels or components.
1.
Install the left-side panel (#4) and right-side panel (#3) onto the front panel
(#2) with M4 x 10 screws (#1) (Fig. 1).
2.
Attach the back panel (#5) to the side panels with M4 x 10 screws (#1) (Fig. 2)
4
Single Door Wall Cabinet
Figure 1.
For technical questions call 1-800-665-8685
Figure 2.
V1.0
Figure 3.
Publicité
