Teac PD-301DAB-X Mode D'emploi page 25

Listening to FM radio
FM mode
Press the FM MODE button to switch between stereo and mono
reception.
Display example
FM mode
Stereo
Receive stereo FM broadcasts in stereo.
FM STEREO
o If reception is poor, switch to Mono.
107.90MHz
Mono
Receive FM broadcasts in mono. When the reception of an FM stereo
broadcast is poor, select this mode. The sound becomes mono, but noise
is also reduced, making it sound better.
Changing the received frequency
When a preset number is shown, press the stop (8) button to enable
frequency selection mode.
Increasing the received frequency
Press the direction (;) button to increase the received frequency one
step.
Press the search (,) button to automatically search toward higher
frequencies.
Decreasing the received frequency
Press the direction (l) button to decrease the received frequency one
step.
Press the search (m) button to automatically search toward lower
frequencies.
Changing the frequency from the main unit
Press the stop (8) button and use the skip (.//) buttons in fre-
quency selection mode (preset number not shown).
When a preset number appears, use the skip (.//) buttons to
change the preset number.
25