Publicité
ATTACHMENT SYSTEM
Rafix Bolt
1. Insert the Rafix Bolt into the
shelf so the shoulder is flush to
the surface of the wood.
3. Slide the Rafix Cam over the
Rafix Bolt.
RAFIX
The shoulder must
be flush to the wood.
Rafix Cam
2. Tap a Rafix Cam into the appropriate
hole so the notch faces the edge of
the shelf. The flat edge of the Rafix Cam
must be parallel to the front edge
of the shelf.
Position the screwdriver at a 25° angle.
4. Using a Phillips Screwdriver at a
25° angle, tighten the Cam about
a half turn.
Top view
RAFIX SYSTEM — 05/11
Publicité
