Publicité
Les langues disponibles
Les langues disponibles
C
Cleaning and maintenance
For Models with Single Inlet
Fix the inlet hose to the cold water tap and to the inlet valve on the rear side of the machine
as (Fig.1).
Ensure that:
All connections are tightly fixed.
WARNING!
•
Do not allow children to operate, crawl on, be near or inside your washer.
•
Note that during the wash cycles, the surface temperature of the porthole
door may increase.
•
Close supervision of children is necessary when the appliance is used near
children.
Fault Code List
Displayed on Display Window
"F01"
"F03"
"F13"
"F14"
"F24"
Else fault code, "F04-F98"
"Unb"
"F01" displayed on screen
The machine is not fed with water or insufficient water. Check:
•
Faucet is fully open and has enough water pressure.
•
Water inlet pipe is knotted or not.
•
Filtering net of water inlet pipe is blocked or not (refer to maintenance and repair).
Cold fill
Inlet valve
Overflow or too much foam.
Electronic module fault.
27
EN
Fault Description
Water inflow fault
Drainage fault
Door lock fault
Door unlock fault
Unbalance alarm
Publicité
