Publicité
Les langues disponibles
Les langues disponibles
SECTION G:
LONG TERM STORAGE
At the close of each heating season, or when you do not plan to use your heater for an extended period, the
following procedures are recommended.
1. As the end of the season approaches, calculate your fuel purchases so that you can use up all the fuel you
have on hand. When fuel is stored for over six months, its quality may deteriorate. The use of such fuel will
have an unfavorable effect on heater operation.
2. If your heater needs any service or repair, now is the time to call your dealer and get it done before storage.
That way your heater will be ready for immediate use when the next heating season begins.
3. If you plan to store your heater in place,
(a)
Disconnect power supply.
(b)
FF-55T: Clean the fuel acceptance fitting and remove any paraffin, dust or
FF-55:
(c)
Wipe off any stains or dust on heater with a damp cloth, then wipe once again
using a dry cloth.
4. To store heater in another location,
(a)
Disconnect heater.
(b)
FF-55T: Remove all fuel from the fuel sub tank and clean the fuel acceptance fitting.
FF-55:
(c)
FF-55T: Disconnect flue pipe from the heater.
FF-55:
NOTE: Fuel remaining in the fuel line may flow out when fuel line is disconnected.Have a container ready
to catch drainage.
(d)
Remove any soot accumulated in the flue pipe using a brush and/or vacuum cleaner.
(e)
Wipe off any stains or dust on heater with a damp cloth, then wipe once again using a dry cloth.
(f)
Put the heater in the original shipping box, and store in a dry place. If original shipping box is not
available, cover the heater completely with a large plastic bag to protect from dust during storage.
(g)
Plug exhaust and air intake openings of the flue pipe by using optional caps.
(Part #17212661 and #17212656)
Take the following measures to avoid fuel leakage during the transportation of the heater.
- ALWAYS move the heater in an upright position.
- ALWAYS drain fuel from the fuel sump before transportation. (FF-55)
GB
18
GB
18
FF-55T_FF-55_Type E_6 language_A4.indb
18
water remaining in the fuel sub tank and removable fuel tank to
prevent rusting.
Close the main tank valve. Remove all fuel from the fuel sump and
clean the fuel strainer. (See SECTION E: ROUTINE MAINTENANCE)
Close the main tank valve. Remove all fuel from the fuel sump and clean the fuel strainer.
(See SECTION E: ROUTINE MAINTENANCE)
Disconnect fuel line and flue pipe from the heater.
TRANSPORTATION
ENGLISH
Fuel
acceptance
fitting
(FF-55T)
Dealer
2023/06/21
9:20:43
Publicité
