Press ON/OFF button to "OFF" position. ON
lamp will flash and will go out. Circulation fan
and blower motor continue to run for approx.
three (3) minutes to cool down the heater.
SECTION E:
ROUTINE MAINTENANCE
CAUTION: Be sure to turn off and unplug heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE AND PROLONG HEATER LIFE, THE PARTS SHOWN BELOW SHOULD
BE CLEANED REGULARLY:
Louver
1. Clean Louvers (ONCE A WEEK)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Air Filter (ONCE A WEEK)
A mesh filter is located on heater cabinet rear side.
Once a week slide the filter up to remove and it should
be vacuumed clean.
GB
14
FF-55T_FF-55_Type E_6 language_A4.indb
14
TURNING HEATER OFF
Ciraulation air filter
Circulation fan
FF-55T
Ciraulation air filter
Circulation fan
Louver
Fuel strainer
(inside)
FF-55
ENGLISH
2023/06/21
9:20:42