Toyotomi FF-55T Manuel D'utilisation page 21

3. Clean Fuel Acceptance Fitting (FF-55T)
When dirt or dust accumulates in the fuel acceptance fitting, it should be cleaned.
Check fuel acceptance fitting each time your refuel.
4. Check for Fuel Leaks (REGULARLY)
FF-55T: Make it a habit to check for signs of fuel leakage. Wipe off any spilled fuel
on the sub tank and removable fuel tank. Spilled fuel may cause odor or
risk of fire.
FF-55: Make it a habit to check for any sign of fuel leakage along the fuel line
and at all joints. Fuel leaks may lead to risk of fire.
5. Check Flue Pipe Area (ONCE A MONTH)
Check the flue pipe joint to make sure connection is firm.
Use a vacuum cleaner to remove any dust or pet hair.
6. Clean Fuel Strainer (ONCE A MONTH) (FF-55)
The strainer of the fuel sump should be cleaned once a month and before starting
the heater at the beginning of each season.
(a) Close the valve closest to the heater.
(b) To catch the fuel which will drain out, set the Oil catch below the strainer
cover, with a small container under it.
(c) Loosen the two screws from the Strainer cover and remove.
(d) Remove the strainer and wash with fuel oil.
(e) Return the strainer to its original position. Replace strainer cover and screw
to secure.
(f) Wipe away any spilled fuel.
(g) Open the valve in the fuel line. Check for fuel leakage.
NOTE: At the end of each season, unscrew the drain screw to remove all remaining
fuel from the fuel sump.
7. Recommended Periodic Maintenance
As a state-of-the-art furnace, your heater requires periodic inspection and service by an authorized technician
to insure optimum, trouble free performance. This inspection should include: a combustion check; flue pipe
check; burner assembly check; cleaning all necessary parts and replacing gaskets as needed. Please ask your
authorized TOYOTOMI dealer for details and scheduling.
FF-55T_FF-55_Type E_6 language_A4.indb 15
ENGLISH
Check
Check
Oil catch
Fuel
Strainer
Strainer
gasket
Strainer
cover
Drain Screw
GB
15
2023/06/21 9:20:43