Gallagher W-0 Guide De Démarrage Rapide page 4

Setting up the W-0 for first time use
Set the weight unit
Turn on the W-0 scale.
To change the weight unit, press and hold down the
beep will sound when the weight unit changes between kgs and lbs.
Select the weighing mode
Mode
Press the
displayed the scale is in Manual mode.
Weighing Modes
AUTO
(Automatic)
(Manual)
4
bu on to turn Auto weight lock on or off . When AUTO is not
In Automatic mode the W-0 will automatically start weighing the
animal. When the scale has determined an accurate weight, it
will lock on to the measurement and display it on the screen.
This mode is recommended for yards that are well set up and
allow the animals to flow smoothly.
The W-0 is in Manual mode when AUTO is not displayed.
This mode allows the operator to decide when the measurement
is made by pressing the Weigh bu on to lock the weight.
Manual mode is recommended for yards that do not allow the
animals to flow smoothly or where the animals are disruptive.
The operator has greater control over the weighing session.
Gallagher W- Weigh Scale Quick Start Guide
Mode
bu on for 3 seconds. A