Qilive Q.1669 Mode D'emploi page 11

2. Take the earbuds out of the case and tap either earbud
5 times quickly. You'll hear a prompt sound and both
earbuds' LEDs will flash quickly 5 times.
3. Follow the instructions in "4.4. Connect" on page 9 to
connect the earbuds.
5. MAINTENANCE AND CLEANING
Do not use any abrasive cleaners, chemicals, glass
cleaners, universal cleaners or oil-based maintenance agents!
5.1. CLEANING THE EARBUDS
If the volume is lower than it should be with the current setting,
clean the earbuds.
• Remove any earwax or debris from the earbuds with a
soft brush, cotton swabs, or a soft and dry cloth.
Note: Do not use excessive force while removing earwax or
debris. The earbuds may be damaged.
5.2. CLEANING THE CHARGING CONTACTS
If the batteries do not charge properly, wipe gold-coloured
contacts on both earbuds with a dry, soft cloth.
5.3. CLEANING THE CHARGING CASE
When the charging case and earbuds are exposed to foreign
materials, such as dust, sand, or metal shavings, the device
may not charge properly or may be damaged.
In this case, wipe them with a soft and dry cloth before inserting
earbuds into the charging case.
11
EN